A Cut Above

Exmark Blog

Archive for the ‘Uncategorized’ Category

Should You Aerate This Spring?

Monday, February 1st, 2016

Regardless of where you live and what type of turf grass you’re working with, aeration can help your lawn be healthier and more beautiful. The trick is knowing when it’s best to aerate, what equipment to use, and what else you can do to encourage the vigor of your grasses, while limiting weeds’ ability to gain a foothold in the lawn.

Exmark core aerator

Core aeration can be beneficial for most lawns if performed at the right time for the type of turf grass you’re working with.

According to Josh Friell, Ph. D, of The Toro Company’s Center for Advanced Turf Technology, aeration introduces temporary stress to the turf, and recovery time is closely linked to growing conditions and annual growth cycles. As a result, it’s important to keep those considerations in mind when determining an annual aerification plan.

When is the Best Time to Aerate?

Aeration is best performed just before or during periods of high growth, but not immediately preceding or during periods of stress to the lawn, whether from heat or drought. The type of grasses that make up your lawn will determine the best time of year to aerate.

If you’re working with cool season grasses, including bluegrass, creeping bent grass, fescue and ryegrass, it’s best to aerate during the growth periods in the spring and fall.

In the spring, wait until you’ve mowed the lawn a few times before aerating. This will ensure the lawn is growing fast enough to recover and take advantage of the increased pore space and air exchange at the root zone that aeration creates.

Exmark Spreader Sprayer

It’s a good idea to apply fertilizer and weed killer just after aeration to minimize the opportunity for weeds to take advantage of the short-term turf stress from aeration.

One caveat, says Friell, is that any disturbance of the root zone in the spring can increase weed competition by bringing buried seeds to the surface.

“You can reduce the potential for weed competition and increase the hardiness of the grasses by applying fertilizer and a pre-emergent weed killer following aeration. But don’t apply a weed killer if you plan to overseed following aeration, as it will prevent germination of the seed you put down.”

For warm season grasses such as Bermuda grass, buffalo grass, St. Augustine and zoysia grass, aeration can take place during warm times of the year between late-spring and early-autumn.

“Aeration should be performed early enough in the fall that the turf can recover before it needs to prepare for winter dormancy,” Friell said.

As for frequency, Friell said aeration should be performed at least once per year on most lawns, while twice annually is best for lawns with compacted soil, or soil with high clay content.

What To Do Before or After Aeration

Watering after aeration is always a good idea, as Friell said aeration should never be performed when turf is wet, or the dirt contains enough moisture to be muddy.

As mentioned earlier, the application of fertilizer and weed killer is beneficial shortly following aeration, but be sure to skip the weed killer if you’re going to overseed following aeration.

Friell said overseeding following aeration makes sense because seeds can take advantage of the disturbed surface to create better seed-to-soil contact.

“Better seed-to-soil contact means better conditions for successful germination.”

Learn More:

Exploring Fuel Options for Exmark Mowers

Wednesday, January 27th, 2016

One of the most basic decisions you’ll make when purchasing a new mower is fuel type. Today, Exmark offers more fuel options than ever, including gasoline, diesel and propane. So while the decision of which fuel is best for you is one only you can make, Exmark offers industry-leading mowers designed to run on whichever fuel you choose.

Exmark Commercial 30

Gasoline engines are found throughout the Exmark line, on every type of mower we build.

Gasoline-Powered Exmark Mowers

The majority of the mowers Exmark builds are powered by gasoline engines, and they are found throughout the line. Because gasoline is readily available across the country, today it’s the most popular fuel type among homeowners and landscape professionals alike.

Electronic Fuel Injection − EFI

While carbureted engines are still the most popular choice among Exmark mower buyers, today an increasing number of Exmark models are equipped with EFI gasoline engines. EFI replaces the traditional carburetor with a smart fuel system that optimizes settings based on environmental conditions. Performance and productivity are increased, while fuel consumption is reduced by 25-percent or more.

EFI-equipped gasoline engines are available on Exmark walk-behind, stand-on and zero-turn mower models.

Learn more about Exmark EFI-equipped mowers

RED E-Gov governor droop

The increased responsiveness of the E-Gov allows RED-equipped engines to operate at a reduced RPM for increased fuel economy without compromise to performance.

RED Technology

By combining EFI with an electronic governor (E-Gov) and its patented RED Technology, Exmark has further raised the bar on the fuel efficiency, performance and durability of its zero-turn riding mowers. RED enables unprecedented communication among key mower system components, tracking critical engine metrics to prevent critical issues from perpetuating a catastrophic failure.

Exmark offers gasoline engines equipped with RED Technology on its top-of-the-line Lazer Z X-Series zero-turn riding mower.

Learn more about RED Technology-equipped Exmark mowers

Exmark Lazer Z S-Series Propane

State-of-the-art Exmark EFI-propane mowers offer increased fuel economy and performance, with reduced greenhouse gas emissions.

Propane-Powered Exmark Mowers

Today, an ever-increasing number of landscape professionals are turning to propane as their fuel of choice for their mowers and other equipment. The benefits are compelling: including reduced operating costs and an up to 25-percent reduction in greenhouse gas emissions (compared to gasoline). Additionally, Exmark propane mowers are powered by state-of-the-art EFI engines, which raise the bar on propane mower performance and ease-of-starting, with dramatically reduced fuel consumption.

When it comes to an environmentally friendly fuel, today propane is the leading option. Exmark offers EFI-propane engine options on its commercial walk-behind, stand-on and zero-turn mowers, making it easy to outfit your trailer with a full suite of industry leading propane-powered mowers.

Learn more about Exmark EFI Propane mowers

Exmark Lazer Z DS-Series

With a torquey liquid-cooled Kubota diesel engine, the Lazer Z DS-Series is the perfect partner big, tough mowing jobs.

Diesel-Powered Exmark Mowers

Exmark diesel mowers are popular with landscape professionals, parks crews and others responsible for maintaining large areas of grass. Equipped with a liquid-cooled Kubota twin-cylinder engine with a reputation for extreme durability, the Lazer Z DS cuts big jobs down to size. Choose from Exmark UltraCut cutting decks in side-discharge or rear-discharge configurations, in 60- or 72-inch cutting widths.

Learn more about Exmark diesel-powered mowers

Exmark Advantage: Cutting Systems

Sunday, January 24th, 2016

Exmark Cutting System

The true test of any mower deck is the quality of cut it delivers. Landscape professionals depend on it. Homeowners thrive on it. And our reputation rides on it. That’s why we’re constantly improving our cutting decks with the goal of perfection in-mind.

Exmark cutting systems are designed to work as a unit, with each part contributing to its performance and overall durability. Patented flow-control baffles accelerate airflow under the deck, working with the blades to facilitate easy movement of materials and an even, controlled discharge.

Today, we’ll examine two of Exmark’s best cutting systems: the UltraCut Series 6 side-discharge and the UltraCut Rear Discharge.

Exmark UltraCut Series 6

The UltraCut Series 6 cutting deck is featured on the Lazer Z X-Series zero-turn riding mower.

UltraCut Series 6 Cutting System

  • 5.5″ deck depth. 4-point suspension. Full-floating.
  • No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 1.75″-diameter splined blade driver and 30mm (1.18″ ) diameter spindle shaft.
  • Patented spherical bearing design on idler arm pivots requires only annual greasing.
  • Coned anti-scalp rollers.
  • (3) 7-gauge steel reinforcement rings at spindle mounting area on 52,” 60″ & 72.”
  • High-strength polymer belt covers.
  • 10-gauge steel top.
  • 7-gauge steel side skirt.
  • Heavy-duty trim side wear guard.
  • 18,500 fpm blade tip speed.
  • Patented flow-control baffles.
  • No-maintenance, sealed ball bearings.
  • Flexible discharge chute reduces impact damage of trees and other obstacles.
The UltraCut Rear Discharge cutting deck is available on select Pioneer and Lazer Z zero-turn riding mower models.

The UltraCut Rear Discharge cutting deck is available on select Pioneer and Lazer Z zero-turn riding mower models.

UltraCut Rear Discharge Cutting System

  • 5.5″ deck depth. 4-point suspension. Full-floating.
  • 7-gauge high-strength low alloy deck construction.
  • High-strength polymer belt covers.
  • Reinforced anti-scalp rollers.
  • Compression molded UHMW side bumper protects deck and follows ground contours.
  • Lazer Z DS-Series: No maintenance spindles are sealed and non-greasable. 7.75″ diameter cutter housing with 1.75″ diameter splined blade driver and 30mm (1.18″) diameter spindle shaft.
  • Lazer Z S-Series: No maintenance spindles are sealed and non-greasable. 7.75″ diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
  • 18,500 fpm blade tip speed.
  • Patented spherical bearing design on idler arms requires only annual greasing.
  • No-maintenance, sealed ball bearings.

Learn more about the advantages Exmark cutting systems can give you at Exmark.com/Exmark-Advantage/.

Lawn Tractor Zero Turn Comparison: Other Considerations

Wednesday, January 20th, 2016

Quality of Cut: A professional’s calling card

Exmark Pioneer E-Series zero-turn riding mower

An Exmark zero-turn mower makes it easy to achieve a professionally maintained appearance.

Landscape professionals earn their living delivering a consistently superior cut quality for their customers. That’s why Exmark has worked hard to engineer the best cutting decks on the market.

The patented flow-control baffles and exclusive blade designs featured on Exmark cutting systems deliver an unmatched quality of cut that’s optimized for the increased cutting speeds Exmark ZTRs are capable of achieving. When it comes to quickly making tall grass short, with a beautiful finished appearance, no lawn tractor can match an Exmark Lazer Z zero-turn mower. That’s one reason landscape pros choose it two-to-one over the next leading competitor.

Durability: The definition of commercial-grade

One thing we’ve learned in our more than 30 years of building mowers for landscape professionals is that stamped steel decks just don’t cut it when it comes to the demands of mowing sun up to sun down. That’s why every zero-turn mower we build comes standard with a heavy-duty fabricated steel cutting deck. Each of the lawn tractors in this comparison feature stamped steel cutting decks.

Exmark UltraCut Rear Discharge cutting deck

Exmark UltraCut cutting decks use high-strength steel that’s fabricated and welded for unmatched durability.

Fabricated decks are stiffer, stronger and more durable than stamped decks, even reinforced models. And with features like no-maintenance sealed bearing spindles and hex-style blade drivers, the Exmark durability advantage extends to the components as well as the cutting deck itself.

Exmark zero-turn mowers feature state-of-the-art powerplants with gasoline, diesel and propane fuel options. With commercial-duty features such as multi-stage canister-style air filters, pressurized lubrication, oil coolers and cast iron cylinder liners, the engines powering Exmark zero-turn mowers are as cutting edge as the mowers they power.

Our exclusive unitized hydro-drive components and welded, heavy-duty tubular steel unibody frames are two more features that help Exmark mowers deliver the durability landscape professionals need to stay productive and profitable season after season.

Bottom Line: Choose the tools the pros use

When comparing lawn tractors and zero-turn mowers head-to-head, it’s clear zero-turn mowers offer the most compelling combination of productivity, maneuverability and quality of cut available today. And while innovations such as four-wheel steering and four-wheel drive have helped to increase the productivity of high-end lawn tractors compared to earlier models, at every price level examined, Exmark zero-turn mowers are clearly more productive machines.

When it comes to durability, Exmark scores big with true commercial-duty frames, cutting decks, drive systems and engines designed to stand the test of time.

Bottom line: an Exmark zero-turn riding mower very well could be the last mower you need to buy.

Dig Deeper at Exmark.com:

  • Learn more about the advantages of an Exmark zero-turn mower.
  • Learn more about how to determine mower productivity.

Cutting A Great Deal for “Healthy Turf. Healthy Kids.”

Sunday, January 17th, 2016

Joe Kucik of Real Green Systems Takes Home a Top-of-the-Line Exmark Lazer Z-X Series Mower

Joe Kucik of Real Green Systems in Walled Lake, Michigan held the winning ticket in the Project EverGreen Great Mower Giveaway Raffle and took home a top-of-the-line Exmark Lazer Z X-Series mower worth more than $14,000.

Cindy Code, Joe Kucik

Joe Kucik and Project Evergreen Executive Director, Cindy Code, pose with the Kucik’s new suspended operator platform-equipped Lazer Z X-Series mower.

Kucik’s name was drawn from hundreds of would be hopefuls by Project EverGreen Executive Director Cindy Code in the foundation’s booth at the 2015 GIE + EXPO in Louisville, Kentucky.

Exmark donated the mower for the raffle whose proceeds will go to assist Project EverGreen expand its “Healthy Turf. Healthy Kids.”™ Initiative that is revitalizing recreational and athletic green spaces across the country.

“Project EverGreen is very appreciative of Exmark’s support of the raffle that gave us an opportunity to raise awareness and funds to further mission of the “Healthy Turf. Healthy Kids.” initiative,” said Cindy Code, Project EverGreen executive director. “It was a win-win situation for everyone.”

Kucik echoed Code’s comments and thanked Exmark for their generous support of Project Evergreen.

“It was an unbelievable feeling to win the Cadillac of all zero-turn mowers,” said Kucik. “Thanks to Project EverGreen for all the work they do to promote the green industry and the benefits of managed green spaces.”

Exmark Director of Marketing, Daryn Walters, said he couldn’t be happier for Kucik.

“All of us at Exmark are extremely happy for Joe and honored to support Project Evergreen’s “Healthy Turf. Healthy Kids.” Initiative. Now more than ever, we need programs like this to give our children safer, better places to play sports and simply be a kid,” said Walters.

“Healthy Turf. Healthy Kids.” projects have been completed in Cleveland, Atlanta, Milwaukee, San Antonio, Ft. Worth and Round Rock, Texas. Additional projects scheduled for completion this year include Portland, Oregon; Greensboro, Raleigh and Durham, North Carolina.

About “Healthy Turf. Healthy Kids.”

“Healthy Turf. Healthy Kids.” is a nationwide initiative to renovate parks and athletic fields to ensure children have access to safe green spaces on which to play and exercise. Yards, parks and athletic fields not only promote a healthier lifestyle but contribute to economic growth, community development and benefit the environment. Key contributors to the initiative include the Dominion Foundation, Performance Nutrition and the Sports Turf Managers Association.

Learn more at ProjectEvergreen.org.

Lawn Tractor Zero-Turn Comparison: Productivity of $13-14,000 Mowers

Wednesday, January 13th, 2016
Exmark Lazer Z X-Series

A commercial zero-turn rider not only gets mowing done faster, it delivers aa better quality of cut.

For mowers in the $13-14,000 price range, the productivity gap grows significantly when comparing lawn tractors and zero-turn mowers. Productivity for zero-turn mowers nearly doubles, from 3.87 to 6.68 acres per hour, and increases from 3.14 to 4.11 acres per hour for lawn tractors.

The productivity gap between the ZTR and the lawn tractor is nearly 1.45 acres per hour for 60-inch cutting width machines (the widest deck offered on the X739 lawn tractor used for comparison). When you bump up to a 72-inch cutting deck on the Lazer Z X-Series zero-turn mower, the productivity gap further increases to 2.57 acres per hour!

A homeowner with a 72-inch Lazer Z X-Series ZTR could mow five acres in less than 45 minutes. The lawn tractor example would mow the same area in about one hour and nine minutes, saving the homeowner on the Exmark zero-turn mower nearly half an hour in mowing time.

Maneuverability: Mow More; Trim Less

Exmark Lazer Z DS-Series zero-turn riding mower

A zero-turn rider can quickly mow around landscaping thanks to its enhanced maneuverability.

Raw productivity is one thing, but when you add in landscaping, lawn furniture and kids’ areas, the maneuverability of a mower quickly becomes an important component of real-time productivity. As a result, maneuverability is one big reason more landscape pros choose zero-turn mowers. A ZTR isn’t just able to mow more quickly in a straight line, it can also mow closer to landscaping with greater control thanks to its ability to turn-on-a-dime. You’ll finish mowing quicker and reduce the time spent completing trim work – a true win-win situation.

As you move above $10,000-11,000, lawn tractors begin to offer maneuverability-enhancing features, such as four-wheel steering and/or four-wheel drive. But even with those features, the maneuverability still does not compare to the performance of a true commercial zero-turn mower.

Dig Deeper at Exmark.com:

  • Learn more about the advantages of Exmark zero-turn lawn mowers.
  • Learn more about how to determine mower productivity.

*Productivity rating in gross acres per hour is based on the published specifications for each product. Actual performance may vary from specified performance based on conditions.
Formula for calculating acres per hour at 80% efficiency: (MPH x width of cut in inches)/124

Zero-Turn Mower or Lawn Tractor: Productivity Comparisons

Sunday, January 10th, 2016

PRODUCTIVITY OF $4,000-5,000 MOWERS

EX16_Quest_S-Series_InUse_1web72Whether it is a zero-turn mower or a lawn tractor, most mowers in this price range have 48- to 54-inch cutting decks and top speeds of 6-7mph. As a result, the raw productivity numbers are fairly similar in this category, but in reality, the differences in maneuverability are greatest in this price range. That’s because lawn tractors in this category don’t offer maneuverability-enhancing features such as four-wheel steering. On the other hand, the Exmark Quest S-Series is a true zero-turn mower, with the ability to quickly make 180-degree turns. This not only lets you maximize productivity, but also create the distinctive striped appearance that’s the calling card of a professionally maintained lawn.

An Exmark Quest S-Series zero-turn rider with a 50-inch cutting deck is capable of cutting approximately 2.8 acres per hour, or roughly 1/2 acre more per hour than an X320 lawn tractor with a 48-inch cutting deck. Even when you bump up to a 54-inch cutting deck, the X320 is still about .2 acres per hour less productive than the zero-turn machine.

See the productivity chart for these mowers at Exmark.com.

PRODUCTIVITY OF $7,000-8,000 MOWERS

EX16_Pioneer_S-Series_InUse_6_web72Raw productivity numbers for machines in the $7,000-8,000 price range jump roughly one acre per hour for ZTRs, and one-half acre per hour for lawn tractors, when compared to the lower priced mowers. Within the category, the most productive machine – a 60-inch Exmark Pioneer S-Series zero-turn rider – can save homeowners about 23 minutes when mowing five acres, compared to the lawn tractor example.

Similar to the lower price category, the majority of lawn tractors in this price range steer with the front wheels only. This compromises productivity due to reduced maneuverability relative to zero-turn riding mowers. The Pioneer S-Series zero-turn rider offers true zero-turn maneuverability, making the real-world productivity gap even greater when compared to a lawn tractor.

For example, and Exmark Pioneer S-Series zero-turn mower with a 52-inch cutting deck is capable of cutting about 3.35 acres per hour. The same mower equipped with a 60-inch cutting deck can mow up to 3.87 acres per hour. When compared to a similarly priced lawn tractor (an X540) with a 54-inch cutting deck, the 60-inch Exmark zero-turn mower is nearly 3/4-acre per hour more productive.

Check back for our next installment of this series on Thursday, January 14. We’ll compare the productivity of $13,000-14,000 mowers and dive into some other factors to consider when choosing the right type of mower for your lawn.

Dig Deeper at Exmark.com:

  • Learn more about the factors to consider when choosing a zero-turn mower or lawn tractor.
  • Learn more about how to determine mower productivity.

*Productivity rating in gross acres per hour is based on the published specifications for each product. Actual performance may vary from specified performance based on conditions.
Formula for calculating acres per hour at 80% efficiency: (MPH x width of cut in inches)/124

Zero-Turn vs. Lawn Tractor: Introduction

Sunday, January 3rd, 2016
Zero-turn riding mower

Whether mowing wide-open spaces or tackling a highly-landscaped lawn, zero-turn mowers get work done more efficiently.

Home and acreage owners with one or more acres of property are faced with more choices than ever when it comes to mower type, size, features and price.  Among landscape maintenance professionals, it’s safe to say the zero-turn riding mower has become the tool of choice to consistently and quickly achieve a beautiful after-cut appearance. However, when it comes of homeowners, are zero-turn mowers still the preferred choice? Read on to find out.

Productivity: A faster mower = more free time

Landscape pros choose zero-turn mowers because they deliver the finished appearance their clients expect, and they do it more quickly than other mower types. And while it may be true that homeowners don’t have to make money with their mower, it’s a good idea to consider what their time is worth.

Exmark Lazer Z zero-turn mower

An increasing number of home and acreage owners have found the productivity benefits of a true commercial duty zero-turn rider like this Exmark Lazer Z.

Let’s take the case of an acreage owner with about 5 acres to mow, with moderate landscaping, a mixture of mature and small trees, and a kids’ play area in the back yard. We’ll compare lawn tractors and zero-turn mowers at three popular price points: $4,000-5,000; $7,000-8,000 and $13,000-14,000 in posts spread out over the next two weeks.

The comparisons will provide an estimate of the relative productivity that could be expected at each price point from a lawn tractor and zero-turn rider. That said, raw productivity numbers don’t factor in other aspects of mower performance such as maneuverability, durability, operator comfort or quality of cut. As a result, the ultimate productivity of a mower will depend on a combination of factors.

To determine the acres-per-hour productivity of each mower, we used the top speed of the mowers, along with the published width of the cutting deck. Since most mowers are not able to produce a good quality of cut at maximum speed, we assumed 80-percent efficiency from the mowers to account for this, as well as for time spent not actually cutting grass, such as turning around or overlap.

Look for our next installment of this series on Monday, January 11.

Dig Deeper at Exmark.com:

  • Learn more about factors to consider when choosing a lawn tractor or zero-turn mower.
  • Learn more about how to determine mower productivity.

Exmark Employee Profile: Don Uher

Tuesday, December 29th, 2015

Photo Dec 16, 1 20 40 PMDon Uher is a Value Stream Manager in the Exmark manufacturing operation. He’s been an important part of the Exmark team for more than 18 years. Today, we’ll learn a little more about Don and his background.

Where are you from?

I grew up on a farm near Daykin, Nebraska (approx. 30 miles west of Beatrice), and today live on that same property, which is now an acreage.

Tell us about what you do at Exmark?

I’m responsible for the safety, quality, delivery, efficiency and morale of the north value stream at Exmark. I do just about anything that needs to be done in order to keep the assembly lines operating efficiently. I have an outstanding group of supervisors and support personnel who really do the hard work to get it all done. I have to name them all, as they really are the ones who, on an hour-by-hour basis, keep it all running smoothly. They include:

  • Manufacturing engineers: Justin Schuck and Brandon King
  • Supervisors: Dave Ullman; Vicki Pearce; Scott Wolbert; Rafael Oman; Chris Riley; Rick Miller; and Ronda Mewes in the Tool Crib.

They are a great group and do their best to build the highest quality product every day.

What’s your favorite part of working at Exmark?

I’ve been fortunate to have formed great friendships with a lot of people over the years. That’s the best thing I’ll take away from my time at Exmark.

What do you like to do in your free time?

My wife and I usually have too large of a garden, but I also hunt and fish, and we cherish every moment we get together with our grandchildren.

If you could have lunch with any person, who would it be?

People are just people. Some have had more success in life, some less, so meeting anyone in particular doesn’t hold a great deal of interest for me. The “person” I would most like to commune with though would be my Lord, Jesus Christ.

What’s the most surprising thing people might not know about you?

The most surprising thing about me people don’t know won’t be revealed today, but something interesting I’m willing to share is that I make a really good batch of peanut brittle. It’s fantastic!

 

Weed Control Tips and Resources

Sunday, December 27th, 2015

While it’s true that proper turf management is the best frontline defense against the encroachment of weeds, for many folks, getting weeds in the lawn under control can feel like an uphill battle. Thankfully, there are a number of things you can do to thwart even the toughest invasive weeds.

UNL Turfgrass Sciences example

An example of the free electronic (Adobe PDF) documents available from the University of Nebraska-Lincoln Turfgrass Sciences program.

Weed Control Education & Resources

Education is the first step in getting new or established weeds under control. The ability to identify problem weeds and understand their life cycle is important to knowing the best approach to take to eliminate them. A couple of resources that can be helpful in identifying the prevalent weeds in your area are your local extension office, or nearest University. Local lawn and garden stores can also be a valuable local knowledge base.

Here in our home state, the statewide extension is run through the University of Nebraska, which also has a world-class turfgrass science program located at its Lincoln campus. The publications and calendars available on Nebraska Extension website can help a Nebraska home or acreage owner, or landscape professional understand not just what to do, but when to do it based on the plant(s) you’re trying to kill.

UNL IANR Buffalograss Calendar

This calendar for Buffalograss in Nebraska details the proper timing for fertilization, cultural practices (such as mowing) and pest control.

Weed Control Practices

Weed control practices are typically broken into physical or cultural practices, such as mowing, hoeing, mulching or overseeding, or using chemical herbicides, which kill the weeds on which they are applied.

Cultural practices are almost always a part of effective weed control.

According to Josh Friell, Ph. D, of The Toro Company’s Center for Advanced Turf Technology, there are a number of techniques that reduce weeds’ ability to gain a foothold on your lawn.

“Properly managing your turf will minimize any weed encroachment issues. The old saying goes, ‘weeds don’t cause poor turf, poor turf causes weeds’.

“You can maximize turf density with a sound fertilization program, and reduce weeds’ ability to germinate with simple things such as raising your mower cutting height. Your bagged clippings are also a great tool for crowding out weeds in flower beds.”

For lawn care professionals and homeowners alike, herbicides are often a part of the weed control equation. There are two reasons for this: speed and effectiveness at killing even established weeds.

For a number of common annual weeds including crabgrass and foxtail, spring is a good time to get the upper hand using a pre-emergent herbicide. Here in Nebraska, the window for pre-emergent application is typically late-April through early-May.

The timing of your application window will vary based on your location, as it’s determined by the soil temperature, which needs to be around 55 degrees for crabgrass germination. Other weeds germinate at slightly different temperatures, but the goal is the same: to kill weeds or inhibit germination right as they begin to germinate. Your local extension office can help you understand your window for pre-emergent application.

Fall is also an excellent time to focus on controlling problem weeds, as herbicides are very effective at getting at the roots of many problem weeds during this time. That said, not all weeds are appropriate to target in the fall.

“For example,” Friell says, “it can be quite quite wasteful to treat for annual weeds in the fall when they’ll be dead soon anyway.

“Remember, effective control is a matter of knowledge of the species. Use all of the resources at your disposal to understand the weeds life cycle and the best timing for achieving effective control.”

He says label guidance on the product being applied can be valuable for determining application rates and timing for specific weeds.

References and Information Sources: