This is the fifth part of Exmark’s ten part Service and Maintenance Series.
Hi again, David Martin, customer service manager for Exmark.
Before you start cutting grass this spring, make sure the connectors on your equipment are in working order. With most units, the number one connection to check is the castle nuts. These points are essential to test because if they become loose, your wheels could fall off the unit, and we can’t stress how dangerous a situation that can be. Problems with your wheels or castle nuts could also cause damage to the wheel motor—one of the more expensive parts on the equipment to repair.
It’s ideal to check the bolts after the first 100 hours of operating a machine; after that, every 500 hours is adequate. By doing this, you can proactively maintain the least expensive items on the machine before they lead to expensive, larger unit repairs.
The motion control dampers are items that should also be maintained regularly because the deterioration of this piece leads to problems with other, more expensive parts of the mower, like the wheel motor.
So keep an eye on your nuts and bolts for normal wear and tear, and replace them accordingly. It’ll help you save a lot more than money.
Up next in our series, storing your mower’s fuel, so come back soon for the latest post.
SHARE
