Posts Tagged ‘synthetic oil’

Choosing the Right Oil

Thursday, March 11th, 2010

 

 

 

This post is part three in Exmark’s ten part Service and Maintenance Series.

Hey, David Martin again, customer service manager for Exmark.

Your choice of oil is just as important as lubricating your machine. Considering today’s economic climate, we all want to save a few bucks here and there. It’s understandable. But when it comes to your oil, going with a less expensive grease or generic brand of oil might actually cost you more in the long run.

As for appropriate types of oil and grease, many engine manufacturers recommend a certain grade of oil for various engines and equipment. Heeding this recommendation can make a big difference in oil consumption, as well as in the proper lubrication of the engine. It’s also important to note that all grease is not created equal. Using original equipment manufacturer (OEM) parts could pay dividends if you have a problem with your mower.

In addition, most engine manufacturers do not recommend the use of full synthetic oils. The proper mineral-based oil lubricates the engine adequately.

Finally, depending on your wear points, you’ll also need to consider the lubrication of bearings. This information can be found in your maintenance guide or on Exmark’s YouTube channel by clicking here.

Next we’ll cover cleaning your equipment. Be sure to check back soon for the next tip.