Archive for August, 2016

How to Get Rid of Common Lawn Pests

Tuesday, August 30th, 2016

Few things are worse than putting time and effort into trimming, mowing, and maintaining your lawn only to have it overrun by common pests. Part of any good lawn care routine will include a plan to reduce and/or eliminate the insects and rodents most common in your area.

Keep your lawn looking its best!

Eliminate the insects and rodents most common in your area to keep your lawn looking its best!

Depending on where you live and the type of lawn you have, you may encounter any of these destructive beasts.

Grubs

Although there are technically dozens of different kinds of grubs (the larvae of beetles) that vary by region and climate, they all tend to operate the same way when it comes to damaging your lawn. They feed on the nutrient-dense roots of grass, which causes the grass blades to die and create large brown patches. You can typically tell when grubs have taken over your lawn because the dead patches will lift from the ground like a carpet.

When grubs are large enough, you can actually pick them out from underneath the turf and remove them. However, most people turn to pesticides, which provide longer-term treatment to stop the cycle of reproduction. Dry grass (due to drought) and predatory nematodes can also help control grubs, as these will cause them to die naturally.

Moles

While moles might help with grub control, there’s no denying they’re one of the fastest ways to destroy a lawn. Not only do they burrow under the ground, causing holes and damage to the physical structure of your grass, but they feed on earthworms, which are needed to help aerate the soil, keeping your grass lush and green.

Getting rid of moles almost always requires the help of a professional. Because these are larger mammals, they must either be physically removed from the area or have baited traps set out to capture or kill them. Although you can try pouring chemical deterrents in their mole hills, many of these substances end up hurting your lawn more than they help them.

Grasshoppers

Grasshoppers might not seem like a huge nuisance, but anyone who’s had them descend on their lawn en masse knows how quickly they consume everything in sight. They love dry areas with lots of overgrowth, which means they’re especially damaging in areas that may have undergone neglect recently. From there, they move from yard to yard, eating all that they see.

Because of their love of dry areas, a well-watered lawn is actually a grasshopper deterrent. So is a well-mowed lawn, as the shorter grass doesn’t give them (or their eggs) a safe place to hide. These natural ways of controlling grasshoppers are better than pesticides, because by the time you apply them, the damage may already be done.

Chinch Bugs

Chinch bugs like sunny patches of lawn, where they bite into individual grass blades, sucking moisture from the plant and injecting toxins that cause it to come loose. Because they hide in the thatch layer, dethatching is good at preventing them. Pesticides and insecticidal soap can help eliminate them once they’ve taken hold in your lawn.

Other insects that damage lawns include mole crickets, beetles, aphids, cutworms and more. As is the case with most lawn care efforts, prevention is your best cure. By taking good care of your lawn and paying attention to any new or growing dead areas, you can control most pests before they get out of hand.

Keeping Track of Hours Mowed

Thursday, August 25th, 2016

A lot of lawn maintenance companies start out as just one or two guys with a lawn mower and a desire to set their own hours. Although you can begin a landscaping company with a more concrete business plan (and many people do), it’s not uncommon for businesses to start out small and grow much larger as demand increases.

This kind of growth is exciting, but it also means you’ll have a lot more paperwork and maintenance to do. That’s why we suggest tracking hours mowed from the very start. It doesn’t matter whether you have two clients or two hundred—this kind of smart record-keeping will help you with billing, lawn mower maintenance, legal settlements, and more.

Hours and Billing

The reason most landscape companies keep track of hours is for billing and invoice purposes. Some companies charge their clients by the hour, which means you need to know exactly how long your team spent at the work site. Other companies bill at a flat rate, but only know what to pay their own employees based on the hours they put in.

By keeping careful logs that include time spent on maintenance, loading and unloading equipment, drive times, lawn care, and regular breaks, your whole company can run on a tighter schedule. You’ll make better business decisions when you have data to base them on. Additionally, a log of times and places worked will be helpful in case of disputed payroll or complaints about work.

Methods for keeping these kinds of records depend on your business style. While you can opt for keeping paper logs or designing your own spreadsheet, more and more companies are choosing automated GPS systems and apps that allow remote employees to log their activities from their smartphones.

Preventative Mower Maintenance

We all know that mowers need regular maintenance and tune-ups the same way a car does, but not everyone remembers that total hours of run time and heavy usage impacts longevity of your equipment. Unless you keep exact records of when, where, and how long each mower was used, chances are you’re greatly underestimating the usage it undergoes.

Although these estimates vary depending on the make and model of the mowers you use, most maintenance schedules follow these general guidelines.

Oil and Oil Filters: Most mowers need an oil change every 50 to 100 hours. Filter replacement can be done less frequently, at about every 100-150 hours.

Air Filters: Because large amounts of dust, dirt, grass, and other debris are kicked up when a mower is in use, air filters need to be replaced fairly often. Depending on the type of air filter, this may need to be done as often as every 25 hours, or as infrequently as every 100 hours.

Spark Plugs: Most mower manufacturers recommend new spark plugs every 100 hours of use.

Blade Sharpening/Replacement: Mower blades take some of the biggest hits when it comes to commercial lawn care, with sharpening and/or replacements required every 8 to 20 hours. For those who perform lawn care full time, this may mean daily maintenance.

With all of these varying maintenance schedules, tracking hours mowed will help you keep on top of whether your machines need just an oil change, or a couple of different types of maintenance. Since proper maintenance is key to keeping mowers running, the benefits to your business will outweigh any hassles.

These logs also let you know when your mower might be approaching the end of its warranty or when it’s time to purchase new equipment. This can be a great help as you budget for the new equipment, since you’ll have a firm idea of what your average cost per hour is—and what you can spend to improve that outcome even more.

Get a Distinctive Cut with Striping Kits

Tuesday, August 23rd, 2016

A lawn that has been perfectly striped is one of the most serene sights in the world. There’s something about the neat lines and trim edges that makes baseball fields to private lawns look incredible. If you want to create a highly professional finish in your lawn care, striping the grass is the best way to do it.

The look of striping is caused by bending the grass at opposite angles. While this can be accomplished simply by mowing in a careful pattern (as the act of mowing naturally causes the blades of grass to bend), the long-lasting, deep colors of professional striping can only be accomplished with the right tools.

You don’t need a brand new mower in order to achieve these results. With an Exmark striping kit or lawn striper attachment that mounts onto your mower deck, you can achieve stripe perfection while going about your regular mowing routine.

Lawn Striping

Striping the grass is the best way to create a highly professional finish to your lawn.

How Our Stripers Work

Most lawn stripers and rollers, including those offered for your Exmark mower, are designed to be attached or removed, depending on the job you’re preparing to tackle. They’re constructed of the same steel-welded parts and high-grade bolts as the rest of your equipment, which means you get a professional fit and finish. They’re offered in a versatile range of sizes so you can attach your striping kit to everything from a push mower to our top-of-the-line Lazer series.

Once the roller is attached, it automatically presses the grass further and deeper in the direction you’re moving, which means you get more visible results as you mow. You don’t have to adjust the length of the cut—just your movement pattern, as you’ll want to keep your lines straight and your turns tight.

Considerations When Striping a Lawn

While the right equipment will go a long way in helping you achieve the results you want, it’s also important to prep the area accordingly. Grass that is too short won’t bend as well, and your stripes will be difficult to see. Your look will also depend on the type of grass. For example, warm-season grasses, like those you often find in warmer, wetter areas of the South, tend to be more rigid and stripe better.

It might also take some practice before you’re able to get the results you want. Basic stripes are the easiest finish to accomplish, though you may encounter obstacles like trees and shrubs that you have to work around. Over time, you can work up to diagonal lines, criss-cross patterns, or even a checkerboard.

It’s also a good idea to remember that lawn striping is about more than just making things look good—it can also be an invaluable tool as you prepare to continue your lawn maintenance. The straight lines can help guide you as you fertilize and seed. The stripes can also be used to cover bare patches or imperfections in a lawn. You can also step your landscaping up to the next level by using the lines to accentuate a focal piece such as a fountain, outdoor structure, or other lawn showpiece.

Find the striping kit or striper for your Exmark mower

Lean-to-Steer Lawn Care Equipment

Thursday, August 11th, 2016

When it comes to stand-on lawn care equipment, one of the top concerns for most professionals is the ability to control the machine easily and efficiently. Lawn care would be great if every landscaping job was done on a perfectly cultivated rectangle. Unfortunately, no two grounds are created equally. From various slopes and curved angles to hard-to-reach spots you have to access on foot, every piece of terrain has something different to offer.

Stand-on lean-to-steer equipment gives you and your lawn care team more maneuverability out there—a must-have for stand-on equipment when you want to get the job done well and you want to get it done quickly. Here’s how.

One-Hand Operations: Thanks to the lean-to-steer technology, most movement operations (forward/reverse and left/right steering) can be done with one hand, which leaves your other hand free to operate the controls with ease.

Exmark commercial-grade lawn sprayer

This versatile, easy-to-operate, easy-to-maneuver machine offers our most advanced lean-to-steer technology and outstanding stability.

Intuitive Controls: It might sound tricky to be performing two separate functions with two separate hands, but most lean-to-steer controls are very intuitive. Operators are able to use the equipment in a way that feels natural, making the learning curve very quick and easy.

Greater Precision: Most lean-to-steer lawn equipment provides greater precision while you’re working. Because you can rely on a combination of traditional steering and your own body’s movements, you have more flexibility to get in tight spaces and follow curves.

Better Productivity: Productivity: Because they allow precision, most lean-to-steer machines provide great productivity. You’ll experience less switching to smaller machines for finishing or to fit in tight spots, and precise turns can eliminate covering the same space twice.

Compact Size: The compact design of lean-to-steer machines makes it easier to squeeze into tight spaces, and there are also loading/transport benefits: The small footprint means you’ll have more room on your truck overall.

Although lean-to-steer equipment isn’t right for every lawn or type of terrain, it works great in medium-range commercial and residential settings. You’ll get more versatility than you’d find with a traditional stand-on machine.

Exmark’s Stand-On Spreader Sprayer is one of the best and most up-to-date examples of lean-to-steer technology. For functionality, ease of use, and uniform results, you can’t do better than this!